A-A-52166B
3.7 Radio interference suppression. The snowmobile shall be suppressed to limit electromagnetic radiation in accordance with SAE J551-1. Any body equipment emitting radiation shall be suppressed to the same level as the snowmobile.
3.8 Servicing and adjusting. The vehicle shall be serviced, adjusted and delivered in condition for immediate use excluding fueling and battery preparation. The grade and viscosity of the lubricants shall be suitable for operation in temperatures down to -40 °F.
3.9 Painting and marking. Unless otherwise specified (see 7.2), treatment, painting, identification marking and data plates shall be in accordance with the manufacturer's commercial practice. The plate shall include the agency identification and registration number. Unless otherwise specified (see 7.2), the snowmobile exterior color shall be the manufacturer's standard flat white. The identification marking shall be located on a surface adjacent to the operator's
right leg when in the normal seated position so that it is visible and legible to an observer without moving any part of the vehicle and without detaching or dismantling any component parts.
4. REGULATORY REQUIREMENTS
4.1 Recovered materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. QUALITY ASSURANCE PROVISIONS
5.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections (examinations and tests).
5.2 Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID and that the product conforms to the producer's own drawings, specifications, workmanship standards, and quality
assurance practices, and is the same product offered for sale in the commercial marketplace. The
Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract or order.
5.3 Market acceptability. The manufacturer shall have built similar model vehicles, as offered to the Government, for commercial sales for at least the past two years, at a rate of not less than
500 units a year. The manufacturer shall have multiple branches or dealers in order to properly support their vehicles (warranty work, parts and technical support).
6. PACKAGING
6.1 Preservation, packaging, and marking. Preservation, packing, and marking shall be as specified in the contract or order (see 7.2).
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business