A-A-52466 Scooters, Motor: Gasoline Engine Driven, Three- And Four-Wheel, Modified CommercialThis commercial item description (CID) covers gasoline engine driven three-wheeled scooters intended for both local streets and roads and on-station operation, and four-wheeled scooters restricted to on-station operation (see 6.1 for details on restricted use).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

A-A-52466

offered to the Government, for commercial sales for at least the past two years, at a rate of not less than 200 units a year. The manufacturer shall have multiple branches or dealers. The vehicle shall comply with listed applicable documents or their respective commercial counterparts.

3.1.1 Painting and marking. Treatment, painting, identification marking and data plates per MIL STD-122J. Exterior color and identification markings per MIL-STD-1223 for the military service identified by the procuring activity (see 6.2).

3.1.2 Rustproofing. In accordance to the truck requirements of FED-STD-297.

3.1.3 Pintle. when specified (see 6.2), a pintle assembly on the rear of model 2 or 3 vehicles. Pintle of the fixed type, five-ton capacity, with locking pin and chain, Holland Hitch Model T60AL. Pintle installed on the chassis or reinforced bumper with reinforcements to transfer pintle loads directly to the frame. Rearmost part of the pintle not more than 100 millimeters (mm) (four inches) forward of the rearmost part of the vehicle. Pintle hook height to the centerline of the pintle hook on the loaded vehicle in the range of 300 to 460 mm (12 to 18 inches). Two trailer safety chain attachment devices, one adjacent to each side of the pintle. Each attachment providing an ultimate strength not less than the gross vehicle weight of the vehicle furnished. Pintle secured with a minimum of four 0.500 inch bolts.

3.1.4 Trailer lighting receptacle. When specified (see 6.2), on pintle-equipped vehicles, a 12- volt trailer lighting receptacle on the rear adjacent to the pintle, conforming to SAE J560 with its conductors connected and color coded as specified therein.

3.1.5 Special radio interference suppression. When specified (see 6.2), for vehicles operating in critical communications areas, electromagnetic radiation suppressed in accordance with the requirements of MIL-STD-461 for class IIIC equipment in lieu of 3.4.7.4.

3.2 General design.

3.2.1 Model I design standards.

3.2.1.1 FMVSS. Model I scooter to all FMVSS's as applicable to motorcycles.

3.2.1.2 Interior sound level. Model 1, class 1 and 2 to FMCSR 393.94, except when cloth doors are furnished.

3.2.1.3 Exterior noise level. Model 1 to EPA Noise Emission Regulations for motorcycles. Vehicles destined for California to the California Vehicle Code.