A-A-52467
vehicles (see 6.2), seating for the driver only. When specified for type VII (see 6.2), one additional front seat for a passenger and need not be covered by the cab. All seat(s) of deep foam construction with padded backrest.
3.5 Bodies.
3.5.1 Type I (stake and platform). Type I provided with a diamond tread steel flatbed platform to the rear of the cab. Dimensions shall be in accordance with table II. Platform provided with stake pockets and a stake type body with front, rear, and full length side racks made of hickory, oak, ash, or southern yellow pine. A rigid headboard may be used in lieu of front racks. Removable racks. Rack height above the platform bed not less than 300 mm (12 inches).
3.5.1.1 Package space cover. When specified (see 6.2), a tarpaulin package space cover with tiedowns.
3.5.2 Type II (pickup). Type II rigid-construction package compartment to the rear of the cab. Floor area of the package compartment not less than 1.4 square meters (m2) (2,100 square inches) with one dimension (either length or width) not less than 1270 mm (50 inches). The height of the package compartment not less than 300 mm (12 inches). When specified (see 6.2), a box type package compartment cover with a covered area of not less than 0.975 m2 (1,500 square inches). Cover of rigid construction with a hinged opening equipped with a handle and lock. Inside height under the cover, measured from the floor, not less than 460 mm (18 inches). When the cover size is shorter than the total floor length, a removable bulkhead shall be provided to close off the lockable compartment.
3.5.3 Type III (open personnel carrier). Type III provided with padded personnel seat(s) with backrest(s) for passengers to the rear of the cab. Personnel seat(s) facing forward. The personnel seat(s) similar in construction to driver's seat. Stake pockets and racks behind the second passenger seat to accommodate cargo. Racks not less than 300 mm (12 inches) high, measured from the cargo bed.
3.5.4 Type VI (refuse collection). Type VI provided with a hydraulically operated refuse hopper to the rear of the cab. Hopper capacity not less than 1.2 cubic meters (m3) (1.5 cubic yards). Hopper capable of dumping refuse into a receptacle which has an upper edge not less than 1090 mm (43 inches) above the ground. Full hydraulic dumping with hydraulic dump cylinder(s) and a hydraulic control valve. Power for hydraulic operations provided by an electrically driven hydraulic pump.
3.5.5 Type VII (burden carrier). Type VII provided with a flatbed platform with dimensions in accordance with table II. The floor area of the deck not less than 5/8-inch thick plywood or equivalent diamond tread steel.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business