A-A-52467
3.1.1 Painting and marking. Treatment, painting, identification marking and data plates per MIL-STD-1223. Exterior color and identification markings per MIL-STD-1223 (see 6.2), for the military service identified by the procuring activity.
3.1.2 Rustproofing. To the truck requirements of FED-STD-297.
3.1.3 Towing devices. When specified (see 6.2), not less than two towing devices, for towing the vehicle, on the front of the vehicle.
3.1.4 Pintle. When specified (see 6.2), a pintle assembly on the rear of the vehicle. Pintle of the fixed type, five-ton capacity, with locking pin and chain, Holland Hitch Model T60AL, or equal. Installed on the chassis or reinforced bumper with reinforcements to transfer pintle loads directly to the chassis. Rearmost part of the pintle not more than 100 millimeters (mm) (four inches) forward of the rearmost part of the vehicle. Pintle hook height to the centerline of the pintle hook on an unloaded vehicle from 300 to 460 mm (12 to 18 inches). Two trailer safety chain attachment devices, one adjacent to each side of the pintle. Each attachment providing an ultimate strength not less than the gross vehicle weight of the vehicle furnished. Pintle secured with a minimum of four 1/2-inch bolts.
3.1.5 Trailer lighting receptacle. When specified (see 6.2), on pintle-equipped vehicles, a 12-volt trailer lighting receptacle adjacent to the pintle, conforming to SAE J560 with its conductors connected and color-coded as specified therein.
3.2 Design standards. Conform to electric vehicle requirements set forth in OSHA standards, section 1910.178 for powered industrial trucks, type E designation.
3.2.1 Dimensions. Dimensions as specified in table II.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business